ITC - ANPR
      Back to home
      1. Knowledge Base
      2. Dahua
      3. ITC - ANPR

      Dahua - ITC - Installation Considerations

      This brief guide covers recommendations for physical installation of the device - including pole distance, height, and camera angle

      The camera can be installed in the center or side of lanes, with different recommended distances for mounting.

      Mounting height and the best distance to capture:

      Installation Method Camera Height Lane Width Snapshot Distance (min, max) Best distance to capture
      ITC237-PW6M 3m 3.5m 7-14m 9-12m
      4m 3.5m-7m 8-16m 14-16m
      5m 3.5m-7m 9-18m 14-18m
      6m 3.5-7m 10-30m 25m

      Center

      If the camera is installed in the center of the lane, the relationship between the installation height h and the capture distance x is X≥1.7*H.

      For example, in the case of 6m height in the standard scheme, the minimum capture distance is 10.2m.

      Itc 237 center installation.png

      • The camera is installed in the center of the scene
      • The pole is 6 meters high
      • The figure below shows a 2 lane installation

      Itc237 2 lane center.png

      Side

      If the camera is installed in the side of the lane, the relationship between the installation height h and the capture distance x is X≥1.7*H.

      Itc 237 center installation.png


      Itc237 installation diagram 1.png

      • The camera is installed on the right side of the scene
      • The pole is 6 meters high
      • The figure below shows a 2 lane installation

      Itc237 2 lane right side.png

      Limitation

      • ITC devices do not have motion detection
      • ITC do not support substream at default, you will need to enable this in the encode setting of the camera

      Tips & Suggestions

      • 120x50 pixels needs from example photo
      • 5 degree angle or less